Transit Securing; Mains Connection; Storage Battery Operation (Optional) - KERN KFE-TM Betriebs Und Installationsanleitung

6.4 Transit Securing

Please note, if the display unit is used together with platform with transportation lock,
this transportation lock must be released prior to use.
See operating instructions attached to the respective platform.

6.5 Mains connection

Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.

6.6 Storage battery operation (optional)

Before the first use, the battery should be charged by connecting it to the mains
power supply for at least 12 hours.
The appearance of the rechargeable battery symbol in the weight display indicates
that the battery is almost exhausted. The unit will be ready for operation for approx.
another 10 hours before switching off automatically. Charge the battery with the help
of the supplied power pack.
The rechargeable battery symbol shows the charge status of the rechargeable
battery:
Voltage has dropped below prescribed minimum.
Battery very low.
Battery is completely discharged
KFE-TM-BA_IA-e-1614 11