Service, Maintenance, Disposal; Cleaning; Service, Maintenance; Disposal - KERN KFE-TM Betriebs Und Installationsanleitung

9 Service, maintenance, disposal

Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.

9.1 Cleaning

 Keep IP protection.
 Clean the stainless-steel parts with a soft cloth soaked with a cleaning agent
suitable for stainless steel.
 For stainless steel parts do not use any cleaning agents which contain sodium
hydroxide solution, acetic, hydrochloric, sulphuric or citric acid.
 Do not use metal brushes or cleaning sponges of steel wool, as this causes
superficial corrosion.

9.2 Service, maintenance

 The appliance may only be opened by trained service technicians who are
authorized by KERN.
 Ensure that the balance is regularly calibrated, see chap. Testing instruments
control.

9.3 Disposal

 Disposal of packaging and appliance must be carried out by operator
according to valid national or regional law of the location where the appliance
is used.
28 KFE-TM-BA_IA-e-1614