Automatic Adding-Up - KERN KFE-TM Betriebs Und Installationsanleitung

7.8 Automatic adding-up

This function is used to issue and add individual weighing values automatically to the
summation memory on unloading of weighing scale without pressing
• Menu settings:
„F5 Prt"  „P prt", see chap. 8.2
"P4 CHk"  „mode 1", see chap. 11.4
• When function is activated, the indicator
Add up:
 Place weighing goods A.
After the standstill control sounds a signal tone.
 Unload the weighing good, the weighing value is added into the summation
memory.
More weighed goods can only be added when the display ≤ zero.
 Place goods to be weighed B.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory. Number of weighing,
followed by the total weight will be displayed for 2 sec.
 Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.
 You can repeat this process 99 times until the capacity (max) of the weighing
system is exhausted.
• After the audio sound was sounded you can remove the load or add to it.
• Display and delete weighing data see chap. 7.7.
24
appears.
AUTO
KFE-TM-BA_IA-e-1614
.