I User Alerts; Error Code - Zodiac Vortex RV 4200 Montage- Und Gebrauchsanleitung

The remote control LED is fl ashing
slowly or the LED is steadily lit.
The remote control LED is steadily
lit.

5.2 I User alerts

User alerts (depending on the model)
Flashing LED:
5.2.1 Error codes
• Pressing a key deletes the error code and turns off the control box.
• The screen switches to standby aft er 10 minutes. To turn the screen back on, press any key.
• When an error is detected, the control box temporarily suspends the programme (the
• Press and hold the key to revalidate the current programming.
Remote control range problem:
• Positi on the control box on the caddy at least 3.5 metres from the pool.
• Orient the control box towards the pool in order to improve the range of the
remote control. Ensure there are no large obstacles between the control box
and the pool.
• Synchronisati on problem: repeat the synchronisati on steps (see §"3.8.4
Synchronising the remote control with the control box").

Error code:

• Check that the cleaner is correctly connected to the
Er: 10
control box. If necessary, unplug it and reconnect it
following the appropriate procedure.
Er: 02
• Check that there is nothing preventi ng the brushes
Er: 03
and wheels from turning. To do so, turn the wheels
Er: 05
(1/4 turn) to release any debris that may be jammed.
Er: 06
• Cleaner operati ng outside the pool. Make sure you
Er: 07
start the cleaner when it is in the water (see § "3.3
Er: 08
Immersing the cleaner").
Er: 01
• Check that there are no stones or hair in the propeller.
Er: 04
• Clean or change the fi lter if necessary.
Soluti ons
LED is turned off ).
EN
20