Operation; Connecting An Audio Device; Connecting Devices By Cinch Cable - Medion MD 82294 E69010 Anleitung

Operation

Connecting an audio device

•
Please observe the notes in the section "Safety and maintenance" (pages 3).
•
Also comply with the operating instructions of the device to which you will
connect the transmitter.
•
Switch off all devices before connecting them.
You can connect a multitude of different audio devices to the transmitter, e.g. an
MP3 and CD player, the receiver from your stereo system, a computer or even your
television.

Connecting devices by cinch cable

You will need an audio cable with cinch plugs. A 2 x cinch -> 3.5 mm jack
connection cable is included with your device.
1. Set the audio device to a medium loud volume. Then switch the device off.
2. Insert the 3.5 mm jack plug into the audio output socket of the audio device.
3. Insert the red and the white cinch
plug into the relevant coloured
AUDIO IN R and L sockets of the
transmitter.
Note
Devices such as a stereo receiver or a television usually have one red and one
white audio output socket. These are usually identified with OUT, AUDIO
OUT, LINE OUT or similar.
To use these output sockets, you will need a 2 x cinch -> 2 x cinch connection
cable (not included; available from specialised trade).
Operation
Connection sockets
AUDIO IN for audio
devices
11
UK
EN
ES
FR
IT
NL