Cautions And Symbols; Storage And Transport - EKOM DK50 F Gebrauchsanweisung

INSTRUCTIONS FOR USE
3.

CAUTIONS AND SYMBOLS

In installation, operation and maintenance manual, on packages and product, the following labels or characters are
used for extra important data:
Information, instructions and cautions for the prevention of damage to health or
materials
Caution! Dangerous electric voltage
Consult instructions for use
CE mark of compliance
Caution! Hot surface
Compressor is remote-controlled and may start without warning
Instruction : read the user manual.
Caution : Performed maintenance works
Handling mark on package – FRAGILE
Handling mark on package – THIS SIDE UP
Handling mark on package – KEEP DRY
Handling mark on package – TEMPERATURE LIMITATIONS
Handling mark on package – LIMITED STACKING
Mark on package – RECYCLABLE MATERIAL
Earth (ground) connection
Terminal for ground connection
Fuse
Alternating current
4.

STORAGE AND TRANSPORT

The compressor is shipped in cardboard that protects the appliance from damage during transport.
Caution! For transport, always use the original packaging and secure the compressor
in the upright position.
Protect the compressor from humidity and extreme temperatures during transport and
storage. A compressor in its original packaging can be stored in a warm, dry and dust-free

area. Do not store near any chemical substances.
Keep packaging material if possible. If not, please dispose of the packaging material in an
environmentally friendly way and recycle if possible.

Caution! Before moving or transporting the compressor, release all the air pressure
from the tank and hoses and drain the condensed water.
Climatic conditions during storage and transport
Temperature : –25°C to +55°C, 24 h to +70°C
Relative air humidity : 10% to 90 % (no condensation)
Climatic operation conditions
Temperature : +5°C to +40°C
Relative air humidity : 70%
04/2015
-24-
NP-DK50 F-11_04-2015