Specifications; Electrical Specifications - Sony MG10-P1 Bedienungsanleitung

8. Specifications

8-1. Electrical Specifications

Supply voltage DC 12 to 24 V (11 to 26.4 V)
Allowable power startup time: Max. 100 ms
Power consumption 2.0 W + total power of connected modules
Communication area
Communication RS-232C (compliant with EIA-232C
interface standard)
Baud rate setting 2400, 9600, 19200, 38400 bps
Data length 7 or 8 bits
Stop bit 1 or 2 bits
Parity None, odd, even
Delimiter " C R ", " C R
Flow control Hardware flow control (RTS, CTS)
Link function
No. of units linked Max. 16 units (total of 64 counter modules)
Cable length Max. 10 meters
between links
36
(E)
" + " L F "
I/O area
Input format
*1 Output format
Input signals
Output signals
Modules which can be connected (sold separately)
Counter module
I/F module
Other
Operating temperature 0 to +50 dC (no condensation)
and humidity range
Storage temperature
and humidity range
*1: The system cannot be configured in such a way that the total
power of the modules connected to the MG10 will exceed 54 W
when the supply voltage is 12 V or will exceed 108 W when it is
24 V.
Design and specifications are subject to change without notice.
_P1: source input (+COM)/_P2: sink input
(_COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
_P1: open collector output, sink type (_COM)
_P2: source type (+COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
Reset, start/latch, pause, RS trigger (valid
for all connected channels)
General alarms
MG20-DK, MG20-DG, MG20-DT
Different models can be mixed and
connected together; max. 16 units
MG30-B1, MG30-B2 *1
_10 to +60 dC (20 to 90 % RH)
MG10-P1 / MG10-P2
*1