Signal Timing - Sony MG10-P1 Bedienungsanleitung

6-2-3. Signal Timing

Reset input, start input
MIN. 2 ms
Latch input, pause input
(Data)
MAX. 2 ms MIN. 2 ms
RS trigger input (low-speed mode)
MIN. 25 ms
RS trigger input (high-speed mode)
MIN. 1 ms
The input interval varies with the number of the counter modules
used or the RS-232C transmission speed.
Be sure to input signals after data acquisition is finished.
34
(E)
MG10-P1 / MG10-P2