Sony MG10-P1 Bedienungsanleitung Seite 2

[For U.S.A. and Canada]
THIS CLASS A DIGITAL DEVICE COMPLIES
WITH PART15 OF THE FCC RULES AND THE
CANADIAN
ICES-003. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND
(2) T H I S D E V I C E M U S T A C C E P T A N Y
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT
MAY CAUSE UNDERSIGNED OPERATION.
CET APPAREIL NUMERIQUE DE LA CLASSE A
EST CONFORME A LA NORME NMB-003 DU
CANADA.
[ For EU and EFTA countries ]
CE Notice
Marking by the symbol CE indicates compliance
w i t h t h e E M C d i r e c t i v e o f t h e E u r o p e a n
Community. This marking shows conformity to the
following technical standards.
EN 55011 Group 1 Class A / 98 :
"Limits and methods of measurement of radio
disturbance characteristics of industrial, scientific
and medical (ISM) radio-frequency equipment"
EN 61000-6-2 / 99 :
"Electromagnetic compatibility (EMC) - Part 6-2 :
Generic standards - Immunity for industrial
environments"
For DC power-driven products to meet EN 61000-6-2 / 99,
the following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less
2. Cable length for input power source : 10 m or less
3. Scale cable length
Note
When using the same cable for output signal and input
power source, the cable must not be longer than 10 m.
For AC power-driven products to meet EN 61000-6-2 / 99,
the following operational conditions must be satisfied.
1. Input and output signal cable length : 30 m or less
2. Scale cable length
警告
本装置を機械指令 (EN 60204-1) の適合を受ける機器に
ご使用の場合は、その規格に適合するように方策を講じ
てから、ご使用ください。
Warning
When using this device with equipment governed
by Machine Directives EN 60204-1, measures
should be taken to ensure conformance with those
directives.
Warnung
Wenn dieses Gerät mit Ausrüstungsteilen
verwendet wird, die von den Maschinenrichtlinien
EN 60204-1 geregelt werden, müssen Maßnahmen
ergriffen werden, um eine Übereinstimmung mit
diesen Normen zu gewährleisten.
: 30 m or less
: 30 m or less