Functions; Definition Of Terms - Sony MG10-P1 Bedienungsanleitung

4. Functions

The multi interface unit comes with the following functions.
. Peak-hold
. Preset
. Reference point
. Reset
. Start
. Go/No GO judgment
. Hold
The functions are set by inputting the RS-232C commands.
(For details on the settings and operation, refer to the list of
commands in chapters 5 and 6.)
12
(E)

4-1. Definition of Terms

Term Definition
Current value The value currently measured
Maximum (MAX) The maximum measured value
value
Minimum (MIN) The minimum measured value
value
Peak-to-peak (P-P) The value obtained by subtracting the
value minimum value from the maximum value
Measuring modes Current value mode, maximum (MAX) value
mode, minimum (MIN) value mode and
peak-to-peak (P-P) mode
Measured values A general term covering the current values,
maximum values, minimum values and
peak-to-peak values
Peak value A general term covering maximum values,
minimum values and peak-to-peak values
(held inside the modules)
Go/No GO The result obtained by comparing the upper
judgment output and lower limits of the comparator with the
measured value
MG10-P1 / MG10-P2