Mitsubishi Electric CITY MULTI PAR-U02MEDA Bedienungshandbuch Seite 23

▌ Set temperature range
Operation mode
Cool/Dry
Heat
Auto (single set point)
Auto (dual set points)
Fan
*1 The settable temperature ranges vary, depending on the indoor unit model.
*2 The set temperature for Auto mode (either single or dual set point(s)) will appear depending on the indoor unit
model.
*3 The same values are used for the set temperature for Cool/Dry mode and the cooling set temperature for Auto
mode (dual set points). Likewise, the same values are used for the set temperature for Heat mode and the heating
set temperature for Auto mode (dual set points).
*4 The cooling and heating set temperatures can be set under the following conditions.
• The cooling set temperature is greater than the heating set temperature.
• The difference between the cooling and heating set temperatures is equal or greater than the minimum
temperature difference that varies with the indoor unit model.
*5 Restrictions for the set temperature range will apply, if any. If the setting value is outside of the range, a message
"Temp. range locked" will appear.
19ºC–35ºC/67ºF–95ºF
4.5ºC–28ºC/40ºF–83ºF
19ºC–28ºC/67ºF–83ºF
Cool: Same as the set temperature range for Cool mode
Heat: Same as the set temperature range for Heat mode
Not settable
Set temperature range
*1*5
*1*5
*1*2*5
Basic operations
*2*3*4*5
23