Bestway FLOWCLEAR Benutzerhandbuch Seite 5

P6124
P6019
P6005
P61322
P61318
PEDESTAL FIXING
EN60335-2-41 TEST standard requires the filter pump to be vertically fixed on
ground or a certain pedestal made of wood or concrete before use. There
should be two holes 9mm in diameter on the pedestal, the space between
which should be 159mm. Put filter pump on the pedestal and fix them together
by fasten the bolts and nuts. All the pedestal parts should weigh over 18kgs at
least to prevent the pump from accidentally falling.
Installation
Please take a few minutes to check the contents and see if they are all in place.
Pool with two valves
1) Place the loose Hose Clamps (P6124) on both the ends of the Hoses (P6019).
2) Attach the Hoses (P6019) to the corresponding letters on both the pool and the Filter Pump ( A to A, B to B).
3) Tighten the Hose Clamps (P6124) on the pump.
4) Remove the Stopper Plugs from the pool's Inlet and Outlet Valves and insert the Debris Screens (P61322 and P61318).
5) With the Hoses (P6019) and the Debris Screens (P61322 and P61318) in position,tighten the Hose Clamps (P6124) on the pool.
1/2in
>1/2 in
P61318 x 1
P61322 x 1
P6(H1)115
P6720NL
A
B
A
B
5
PARTS REFERENCE
NAME
Air purge valve
Purge valve seal
Filter cap retainer (blue)
Filter cap retainer (black)
Filter cap
Filter cap seal
Filter cartridge
Hose seal ring
Hose
Hose clamps
Filter housing
Optional parts
Debris screen
Debris screen
Hose clamps
NOTE: The quantity of optional parts may vary depending on if the
pump was sold individually or as part of a set.
2-M8 nut
2-M8 bolt
P6019
A
No. QTY.
P6112 1
P6113 1
P6115 1
P6(H1)115 1
P6117 1
P6119 1
58094(II) 1
P6005 2
P6019 2
P6124 2
P6720NL 1
P61322 1
P61318 1
P6124 2
B
S-S-004060