Herunterladen  Diese Seite drucken

Bestway FLOWCLEAR Benutzerhandbuch Seite 4

Vorschau ausblenden


installation/reassembly every time.
Safekeeping the instruction. For reconstruction the pool set every
time, please always refer to the instructions.
-If instruction is missed, please contact with Bestway or search it in
website: www.bestway-service.com
Electric installations should follow national wiring rules. Consult a
qualified electrician for any questions.
Only the media provided or specified by the manufacturer is to be
used with product installation.
It is essential to check that the suction openings are not
It is advisable to stop the filtration during maintenance operations
on the filtration system.
Regularly monitor the filter clogging level.
A weekly check is recommended for cleaning.
Minimum daily filtration operating time of 8 hours is recommended
to ensure clear pool water.
It is essential to change any damaged element or set of elements
as soon as possible. Use only parts approved by person
responsible for placing the product on the market.
All filters and filter media shall be inspected regularly to ensure that
there is not a build-up of detritus thus preventing good filtration.
The disposal of any used filter media should also be in accordance
with applicable regulations/legislation.
In case of doubt on the pump or any circulation devices, contact a
qualified installer, or the manufacturer/importer/distributor.
The water circulation installation shall comply with the European as
well as national/local regulations, especially when dealing with
electrical issues.
Any change of valve position, pump size, grille size can cause a
change of the flow and the suction velocity can be increased.
Mind all the safety requirements and recommendations described
in the manual.
NOTE: This product is not intended for commercial use.
Please read the instruction manual carefully and keep it for
future reference.



  Andere Handbücher für Bestway FLOWCLEAR