IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
WARNING-RISK OF ELECTRIC SHOCK- Never run the filter
pump when people are swimming in the pool.
The pump is to be supplied by an isolating transformer or supplied
through a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA.
The power source on the wall of building should keep more than
4m away from pool and at a height of 1.2m at least.
The pump unit must only be supplied at safety extra low voltage
corresponding to the marking on the appliance.
Extension cords can't be used.
DO NOT BURY CORD. Locate cord to minimize abuse from lawn
mowers, hedge trimmers, and other equipment.
WARNING-The supply cord cannot be replaced. If the cord is
damaged the appliance should be scrapped.
WARNING-This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Cleaning and user maintenance must be performed by an adult
above 18 years old who is familiar with the risk of electric shock.
CAUTION-This pump is for use with storable pools only. Do not
use with permanently-installed pools. A storable pool is constructed
so that it is capable of being readily disassembled for storage and
reassembled to its original integrity. A permanently-installed pool is
constructed in or on the ground or in a building such that it cannot
be readily disassembled for storage.
IMPORTANT- Using the pump with an unmatched electrical supply
is dangerous and will result in catastrophic failure of pump.
RISK OF ELECTRICAL SHOCK- Before removing, cleaning,
serving or making any adjustment to the product, always unplug
this product from the electrical outlet.
DO NOT MODIFY THE PLUG IN ANY WAY OR USE PLUG
ADAPTORS TO CONNECT UNIT TO ELECTRIC SUPPLY.