Basic Settings - Electrolux GA60LV Benutzerinformation

10 www.electrolux.com
Programme
ECO
AUTO Sense
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com

6. BASIC SETTINGS

You can configure the appliance by
changing basic settings according to
your needs.
No Settings
1 Water hardness From level 1L
2 Rinse aid level
3 End sound
4 Auto door open On (default)
5 Key tones
6 Latest pro‐
gramme selec‐
tion
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
Water (l)
1)
10.5
9.6 - 13.1
8.9 - 10.9
Values
to level 10L
(default: 5L)
From level 0A
to level 6A (de‐
fault: 4A)
On
Off (default)
Off
On (default)
Off
On
Off (default)
Energy (kWh)
0.821
0.74 - 1.06
0.58 - 0.70
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
1)
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the
buttons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
Duration (min)
240
120 - 170
60