Basic Functions; Switching The Lcd Tv On And Off; After Switching The Device On For The First Time; Channel Selection - Medion MD 32532 Anleitung

Basic functions

Switching the LCD TV on and off

1. Press the operating switch on the back of the device. The device will go into the standby
mode and the front display will shine blue
2. Press either a number button on the remote or a P/CH channel selection button of the
remote or on the device, to switch the device on. The front display will turn off.
3. You will switch the device back to the standby mode with the Standby button of the remote
or the Standby button on the top of the device.
4. Press the operating button on the back of the device again, in order to switch off the device
completely.

After switching the device on for the first time

The AUTO PROGRAM (CHANNEL) Menu will appear when you switch your device on for the first time.
Use the directional buttons, to make a different selection, if you would like to change the
language and country setting.
The country setting influences the sequence in which the channels are stored.
Then confirm the PLEASE CHECK ANTENNA CABLE message, by pressing the OK button or the red
button.
Press the blue button to terminate the process.
APS
The automatic channel search (APS) will begin subsequently. It will take several minutes.
You can terminate the process with the blue button.
The channels will be stored in the channel positions in a country-specific sequence. One hundred
channels can be stored.
The channels table will appear after the end of the automatic channel storage. The table will close
after a few minutes if it is not edited further. The channel at channel position 1 will be broadcast.

Channel selection

• Either press the P/CH button (on the device or on the remote) or select the channel directly
by means of a number button, in order to select a channel. Enter the two numbers rapidly,
one after the other, for a two-digit number.
• Select the last channel broadcast with the P<P buttons.

Sound settings

• You will increase or reduce the volume the volume with the
remote or on the device.
• Press the Mute
• Choose between mono and stereo output, DUAL A and DUAL B, with the I-II button.
14
button, to switch the sound off completely or to restore it.
E E
N N G G L L I I S S H H
volume buttons on the