Menu Feature; Menu Install - Medion MD 32532 Anleitung

Menu FEATURE

Menu point
Sleep Timer
Child Lock
Language
Ext-2 Out
Default Zoom
Menu
background
Menu timeout
Videotext
language

Menu INSTALL

Available channels will be searched for with the automatic channel search and stored in the channel
positions in the sequence found in the normal case. You will also be able to rearrange the channel
positions in the channel table (see PROGRAM (CHANNEL) menu, page 24).
Apart from this, the INSTALL menu allows you to carry out a manual search, to store individual
channels and to make a fine adjustment of the image.
Menu point
Program
22
Settings
Select a time, after which the device will switch off independently.
You can set the time in 10-minute steps (Maximum two hours) with
the directional buttons.
The Sleep Timer time will start immediately after the setting
with .
The buttons on the device will be blocked (with the exception of the
mains switch) if the setting is at ON.
Select the language of the OSD menu. It will switch immediately.
You will be able to select the input that SCART EXT – 2 should
access here, when another device is connected to one of the inputs,
if you are using the EXT – 2 SCART connection as the output for a
different device.
Select between TV, EXT – 1, EXT- 3, EXT- 4, EXT- 5 and PC
Set the pre-setting for the zoom here.
Choose between the following settings: PANORAMIC, 4:3, 14:9
ZOOM.
The zoom value selected will be set, if you have set the zoom to
AUTO with the WIDE button and provided that no other WSS
signals containing the picture ratio are being transmitted in the
broadcast signal or in the signal from an external device.
Choose whether the menu background should be clear
(TRANSLUCENT) or non-transparent (OPAQUE).
You can set the time after which the OSD will close automatically
here: 15, 30 or 60 seconds.
The pre-setting is WEST. You will be able to change the language
setting if you are in a different language area: EAST, CYRILLIC,
TURK/GRE or ARABIC.
Settings
You will see the number of the channel position of the channel
currently playing here.
You can select a different channel position (0 to 99) with the
directional buttons or with the number buttons.
Store the new channel position with the OK button, or by selecting
the STORE PROGRAM (CHANNEL) point and pressing .
There will be the PROGRAM STORED message.
Pay attention to the fact that the existing channel at the channel
position selected will be overwritten. The channel will be stored in
the channel table with its channel number (e.g. C-25), not with its
channel name.
E E
N N G G L L I I S S H H