Medion MD 32532 Anleitung Seite 101

Fix the steel rails to the wall
1. Choose a position on the wall where the LCD TV will have enough distance from other objects
(cf. "Installation location" section, page 4).
When doing this ensure that the suspension fittings at the rear of the unit sit in the small end
of the suspension openings in the steel rails (cf. the drawing on the next page).
2. Use the drill template supplied to mark the eight holes on the wall.
3. Drill eight holes for the rawl plugs in the wall. See the illustrated instructions - Fig 1.
4. Insert the rawl plugs. See the illustrated instructions Fig 2.
CAUTION! The rawl plugs must be fixed securely! Do not hang the unit up if the rawl
plugs are not completely inserted into the wall.
5. Firmly screw both of the steel rails using four screws each. The small side of the suspension
fittings must face outwards. See the illustrated instructions Figs. 3 and 4.
6. Now you can hang the LCD TV into the steel rails. See the illustrated instructions – Figs.
8 and 9.
W W
A A L L L L M M O O U U N N T T I I N N G G
33