Connection Options; Headphones - Medion MD 32532 Anleitung

EXT - 1
EXT - 2

Connection options

Headphones

The headphones connection is located on the side of the device.
The main loudspeakers remain switched on if headphones are connected. The volume button and
the mute switch regulate the main loudspeakers.
Regulate the volume of the headphones in the menu SOUND, see page 21.
PC
The LCD TV can be connected as a monitor or an additional monitor to your PC or your notebook.
The display from your notebook or PC can be transmitted to the LCD TV.
This is how you connect the LCD TV:
1. Switch both devices off.
2. Connect a VGA cable (monitor cable; not supplied) to the VGA input of the LCD TV and to the
graphic card output of the PC or notebook.
3. Tighten up the screws of the monitor cable with your fingers, so that the plug is correctly
seated in the socket.
4. If you want to send a sound signal then connect an audio cable to the PC AUDIO-IN socket.
5. First switch on the LCD TV.
6. Then switch on the PC/notebook.
Press the PC button on the remote control to switch to PC mode.
7.
8. The PC display appears on the LCD TV. Use the TV button to return to the TV mode.
SCART input for connecting to the following devices:
1. Video recorder
2. DVD player
3. Games console
4. Decoder (e.g. satellite receiver) etc.
You will need a SCART cable for this connection (not included in the
delivery).
Like EXT – 1.
For EXT – 2 you can select an input source in the FEATURE menu
(see page 22).
Connection for the aerial cable (not included in the delivery).
Audio input for 3.5 mm stereo jack plug, e.g. for PCs.
Connection for the mains power cable (supplied).
Operating switch: Switches device to standby mode and to off again
C C
O O N N N N E E C C T T I I O O N N O O P P T T I I O O N N S S
9