Basic Functions; Turning The Lcd Tv On And Off; Navigating Within The Menu; Language Setting - Medion MD 30036 Bedienungsanleitung

Basic functions

Turning the LCD TV on and off

1. Put the main switch on the lower section of the television in the 'I' (ON) setting. The device will go into Standby Mode
and the display on the front will shine red.
2. Press either the STANDBY button on the device or on the remote to switch the device on.
3. You will switch the device back to the Standby Mode with the STANDBY button.
4. Put the main switch on the lower section of the television in the '0' (OFF) setting, in order to switch the device off com-
pletely.

Navigating within the Menu

1. Press the MENU button [8], in order to activate the OSD.
2. Select the options from the Main Menu with the
3. Confirm the option selected from the Main Menu and open the sub-menu with the
4. Select the options from the sub-menu with the
5. Confirm the option selected from the sub-menu in which you want to make changes or settings with the
tional buttons.
6. Set the required vale or make a different selection with the
7. You will return to the superordinate Menu with the MENU button [8].
8. You will close the Menu and confirm the selection at the same time with the EXIT button [7].
Note
The Menu will close automatically if you do not press a button for longer than 15 seconds when operating the
OSD. However, you can vary the length of the display. Read the 'Menu SYSTEM Menu' on Page 19 for this.

Language setting

The OSD of your LCD TV is set to English in the delivery status. Set the OSD to the language that you require as follows:
1. Press the MENU button [8] on the remote control.
2. Select the SYSTEM Menu point (4th Menu point in the Main Menu strip on the left of the picture [MAIN MENU] with
the directional button.
directional button. The SPLEEP TIMER entry will be emphasized.
3. Confirm with the
4. Select the OSD LANGUAGE Menu point with the
LANGUAGE ENGLISH strip will appear on the screen.
5. Select the language that you require with the
6. Confirm your selection with the OK button. The OSD will appear.
7. Press the button EXIT [7], to exit the OSD menu.
/ directional buttons.
/ directional buttons.
/ directional buttons.
directional button. The OSD Menu will be faded out and the OSD
directional buttons.
Basic functions
/ directional buttons.
/ direc-
DE
EN
NO
FI
DK
SE
13