Repairs; Intended Environment; Power Supply - Medion MD 32532 Anleitung

Repairs

• Repairs to your LCD TV should only be carried out by qualified specialists.
• if a repair must be carried out please contact our authorised service partner only.

Intended environment

• The appliance can be operated at an ambient temperature of +5° C to +35° C and a relative
humidity of 20% - 85% (non condensing).
• In the switched-off state the LCD TV can be stored from -20° C to +60° C.
• Keep the appliance at a distance of at least one metre from high frequencies and magnetic
sources of interference (television, loudspeaker boxes, mobile telephones etc.) to avoid
malfunctioning.
• After transporting the LCD TV wait until the appliance has reached ambient temperature
before switching it on.
• Large changes in temperature or fluctuations in humidity can cause moisture to build up
due to condensation within the LCD TV, which can cause an electrical short circuit.
• During thunderstorms or if the appliance is not going to be used for long periods, remove the
plug from the mains socket and the aerial cable from the aerial socket.

Power Supply

Please note: Even when the mains switch is off some components of the appliance are
live. In order to disconnect the power to your LCD TV or to completely isolate the
appliance from voltage sources remove the mains plug from the mains socket.
1. Operate your LCD TV mains (power supply) only on grounded sockets with AC 220 V -240V~/50
Hz. If you are not sure about the power supply at your location, check with your power company.
2. Use only power adapter provided.
3. For additional safety we recommend use of an excessive voltage protection device to protect
your LCD TV from damage resulting from voltage surges or lightning.
4. The mains switch installed does not detach the LCD TV from the mains supply completely.
5. The power socket must be in the vicinity of your LCD TV and within reach of the power
cables.
6. If you use an extension cable, ensure that it fulfils the VDE requirements. Please ask your
electrician.
7. You should lay the LCD TV cables in a manner that no one can trip or step on them.
8. To avoid damage to cable, do not place any objects or furniture on the cable.
9. To avoid power consumption when the device is switched off, either pull out the power plug
when the device is not being used or connect the device to a master-/slave power bar.
10. Your device has an On and Off switch. The LCD TV can be switched on or off by means of it.
No electricity is consumed if the switch is at OFF.
S S
A A F F E E T T Y Y I I N N S S T T R R U U C C T T I I O O N N S S
5