Wall Mounting - Medion MD 32532 Anleitung

Wall mounting

The LCD TV can be fixed to the wall.
Accessories
The following accessories are included:
2 steel rails, 4 screws M4 x 10. 4 plastic suspension fittings, 1 drill template, 1 illustrated mounting
instructions (applicable to many types of appliance).
In addition you will need 8 rawl plugs and screws for your wall (obtainable at specialist stores).
Safety instructions for wall mounting
Please make sure that you observe the following safety instructions for wall mounting:
• The LCD TV should only be mounted on vertical walls.
• Before you carry out the mounting, check whether the wall has the capability of carrying
three times the weight of the unit (16 kg). If in doubt ask the advice of a qualified fitter.
• Switch off the LCD TV before mounting. Power cable and aerial cable must be disconnected.
• A minimum of two people are required to mount the TV.
• You will need a drill and a Phillips-type screwdriver to mount the TV.
CAUTION! When choosing the rawl plugs and screws make sure that they are suitably
designed for your wall.
Mount suspension devices to appliance
1. Feed the M4 x 10 screws
through the plastic
suspension fittings. The side
of the plastic suspension
fittings with the smallest diameter faces outwards.
2. Tighten the screws with the plastic suspension
fittings into the screw holes provided in the rear of
the unit.
See fig 5A in the illustrated instructions.
Removing the base
The base of the unit has six screws which are fixed to the
back.
1. Release these six screws with a Phillips-type
screwdriver.
2. Lift the device upwards.
See fig 6A in the illustrated instructions.
32
E E
N N G G L L I I S S H H