Medion MD 32532 Anleitung Seite 91

Band
Channel
Colour System You select the country-specific TV colour standard here: AUTO (the
Sound System You set the country-specific television system here: BG (Australia
Fine Tune
Search
VCR
Store Program Store the channel selected. (See PROGRAM (CHANNEL) and
Storing a video recorder manually
You will be able to use the manual search to set a video recorder to the LCD TV, for example.
• Set your video recorder to the test signal after the LCD TV and the video recorder have been
connected by means of the aerial (see Examples of Connections, page 9).
• Carry out a manual search with the LCD TV.
• Store the test signal at channel position 0 when it has been found (this channel position will
not be occupied by a television channel).
It is recommended to reserve channel position 0 for a video
recorder, if you want to connect one.
The television frequency band is divided into the C (normal
channel) and S (special channel) types of channel.
The type of channel of the channel types of the channel currently
set will appear here.
You will see the channel number of the currently set here. Select a
different channel with
correct colour system will be set automatically), PAL (for PAL 50
MHz), PAL 60 and SECAM.
SECAM will not be available if the SOUND SYSTEM (see the
following point) has been set to I.
NTSC 3.58 and NTSC 4.43 (the usual colour format in North
America) will be available in addition, if an external source has
been selected (EXT – 1, etc.).
The selection of an incorrect colour system will lead to a faulty
picture.
The colour system currently received will appear in the information
box if the PICTURE menu.
and Western Europe), I (United Kingdom) or DK (East European
countries).
You will be able to make a fine adjustment to the image of the
currently selected channel with
You will be able to carry out a manual channel search here.
Start a search upwards or downwards with the
buttons. The search will pause at each channel found. You will see
the MHz value.
You will be able to allocate the channel to a position under the
PROGRAM (CHANNEL) menu point. Pay attention to the fact that
another channel at this position will be overwritten during storage.
You will be able to carry out another fine adjustment at the FINE
TUNE menu point (see the next section).
Press OK or select the STORE PROGRAM (CHANNEL) point and
press , to store the channel. There will be a PROGRAM STORED
message.
Choose the ON setting if a video recorder has been connected at
the EXT – 1, EXT -2 or EXT – 4 connections.
SEARCH points).
M M
E E N N U U
.
here.
F F E E A A T T U U R R E E
directional
23