Troubleshooting - Beko TSE 1230 Bedienungsanleitung

7

Troubleshooting

Please review this list before calling
the service. It will save your time and
money. This list includes frequent
complaints that are not arising
from defective workmanship or
material usage. Some of the features
described here may not exist in your
product.
The refrigerator does not operate.
• The plug is not inserted into the
socket correctly. >>>Insert the
plug into the socket securely.
• The fuse of the socket which
your refrigerator is connected to
or the main fuse have blown out.
>>>Check the fuse.
Condensation on the side wall of the fridge
compartment (MULTIZONE, COOL CONTROL
and FLEXI ZONE).
• Door has been opened
frequently. >>>Do not open and
close the door of refrigerator
frequently.
• Ambient is very humid. >>>Do
not install your refrigerator into
highly humid places.
• Food containing liquid is stored
in open containers. >>>Do not
store food with liquid content in
open containers.
• Door of the refrigerator is left
ajar. >>>Close the door of the
refrigerator.
• Thermostat is set to a very cold
level. >>>Set the thermostat to
a suitable level.
Compressor is not running
• Protective thermic of the
compressor will blow out during
sudden power failures or plug-
out plug-ins as the refrigerant
pressure in the cooling system
of the refrigerator has not been
balanced yet. The refrigerator will
start running approximately after
6 minutes. Please call the service
if the refrigerator does not
startup at the end of this period.
• The fridge is in defrost cycle.
>>>This is normal for a full-
automatically defrosting
refrigerator. Defrosting cycle
occurs periodically.
• The refrigerator is not plugged
into the socket. >>>Make sure
that the plug is fit into the socket.
• Temperature settings are not
made correctly. >>>Select the
suitable temperature value.
• There is a power outage.
>>>Refrigerator returns to
normal operation when the
power restores.
The operation noise increases when the
refrigerator is running.
• The operating performance of
the refrigerator may change due
to the changes in the ambient
temperature. It is normal and not
a fault.
23
EN