Abus TVHD75500 Bedienungsanleitung Seite 53

ALARM
RESUME
SEQUENCE
SEQUENCE TIME(S)
ALARM IN SET
ALARM OUT SET
Function
RESUME
SEQUENCE
SEQUENCE TIME(S)
ALARM IN SET
ALARM OUT SET
Alarm IN SET
Function
ALARM INPUT
ALARM TYPE
ACTION
ON
ON
5
Description
This mode allows the dome to continue its previous action
(scan, pattern, pan/tilt or previous position) after all alarms
have been processed.
Off: Function deactivated
On: Function activated
This is the time during which the dome will carry out an
alarm activity when more than one alarm with the same
priority arrives at the same time.
Off: Function deactivated
On: Function activated
This is the time span during which the dome keeps the
alarm active when it is no longer physically present. Values
from 5 to 300 seconds can be selected.
Settings for the alarm inputs
Settings for the alarm outputs
Description
Number of alarms; 2 alarm inputs are available.
The alarm input can be defined here. The following settings
are available:
Always Open: Normally open
Always Close: Normally closed
OFF: Alarm input deactivated
When an alarm occurs, one of the following tasks is
executed: Output 1, Output 2, Preset 1 – 8, Pattern 1 – 4,
Tour 1 – 8,
53