9. Diagnosis (self-test)
If the camera is connected to a voltage source, it performs a self-diagnosis.
SN
ADDRESS
COM FORMAT
PROTOCOL SELF ADAPTIVE
VERSION
BUILD DATE
Function
SN
ADDRESS
COM FORMAT
PROTOCOL SELF ADAPTIVE
VERSION
BUILD DATE
10.
OSD menu
To display the OSD menu, call up preset 95. Move the joystick of the control panel up and down
around the cursor position. You can confirm and return to the menu by pressing the IRIS+ button.
MAIN MENU
SYS INFORMATION
SYSTEM SETTINGS
FACTORY SETTINGS
RESET CAMERA
REBOOT SYSTEM
EXIT
Function
SYS INFORMATION
SYSTEM SETTINGS
FACTORY SETTINGS
RESET CAMERA
REBOOT SYSTEM
EXIT
Description
Displays the serial number
Displays the dome address (ID)
Displays the baud rate
Displays the protocol
Displays the firmware version
Displays the firmware date
-
-
-
-
-
Description
Displays system information
Camera parameter settings
Restores factory settings
Resets settings
Restarts the dome
Closes the OSD
39