Practical Advice; Maintenance And Servicing; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch PLL 360 Originalbetriebsanleitung

12 | English
sloping surface. This means that the laser lines are no longer
necessarily running perpendicularly to one another.

Practical Advice

Only the centre of the laser line must be used for
u
marking. The width of the laser line changes depending
on the distance.
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable support surface
for measuring. Place the measuring tool with the 1/4" tripod
mount (3) on the thread of the tripod (18) or a conventional
camera tripod. Tighten the measuring tool using the locking
screw of the tripod.
Roughly align the tripod before switching on the measuring
tool.
Securing with the universal holder (accessory) (see
figures H–K)
You can secure the measuring tool on vertical surfaces using
the universal holder (13). The universal holder is also suit-
able for use as a floor stand and facilitates the height adjust-
ment of the measuring tool.
Lift up the mounting plate (15) of the universal holder (13)
as shown in figure H (a) so that it engages in this position.
Using the rotary knob (14), lower the mounting plate to the
required height (b).
To use the universal holder (13) as a wall mount, secure it on
a wall as vertical as possible with the mounting plate lifted up
(figure I). Secure it against sliding, e.g. with a fastening
screw (commercially available).
To use the holder as a tripod on a table, lift up the base
plate (16) so that it is parallel to the mounting plate (c) (fig-
ure J).
Screw the 1/4" wall mount screw (17) into the tripod
mount (3) on the measuring tool (figure K). Roughly align
the universal holder (13) before switching on the measuring
tool.
To fold the universal holder (13), push the base plate (16)
towards the rear of the holder. Using the rotary knob (14),
raise the mounting plate (15) to the topmost position. Then
push the mounting plate down towards the rear of the
holder.
Laser Viewing Glasses (Accessory)
The laser viewing glasses filter out ambient light. This makes
the light of the laser appear brighter to the eye.
Do not use the laser goggles as protective goggles.
u
The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while
u
driving. The laser goggles do not provide full UV protec-
tion and impair your ability to see colours.
1 609 92A 4J0 | (25.01.2019)

Maintenance and Servicing

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
The areas around the outlet aperture of the laser in particular
should be cleaned on a regular basis. Make sure to check for
lint when doing this.
Only store and transport the measuring tool in the protective
pouch (19).
If the measuring tool needs to be repaired, send it off in the
protective pouch (19).

After-Sales Service and Application Service

Our after-sales service can answer questions concerning
product maintenance and repair, as well as spare parts. You
can find exploded drawings and information on spare parts
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the type plate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Bosch Power Tools