Assembling The Microscope; Assembly Tools - Leica DMI3000B Bedienungsanleitung

6. Assembling the Microscope

The microscope components* are logically as-
sembled in this order:
• Transmitted-light illumination carrier
• DIC module and DIC objective prisms
• Condenser with condenser head
• Eyepieces
• Objectives
• Transmitted-light lamps
• Lamp housing mount (mirror housings)
• Incident-light lamps
• Assembly of incident light turret disk
• Specimen stage
• Polarizer and analyzer
The order may be vary when using climate
chambers or other systems and optical acces-
sories.
In this case, read Chapter
"6.16 Optional accessories" → p. 56.
More user manuals on
* depending on scope of delivery
ManualsBase.com

6.1 Assembly Tools

If possible, the microscope should be assem-
bled and set up with the assistance of Leica
sales or service personnel.
A small number of universal screwdrivers which
are included in the scope of delivery are re-
quired for assembly (Fig. 7).
Fig. 7 Assembly tools
1 Phillips screwdriver*
2 3 mm Allen key
3 1.5 mm centering key*
4 2 mm centering key*
5 3 mm hex key*
6 2.5 mm hex key* (short type)
7 2.5 mm hex key*
2
6
1
3
4
7
6. Assembly
5
2
29