Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPX II
Cleaning and Maintenance
DANGER!
Risk of death by electric shock!
Before opening the housing cover, disconnect the printing system from the mains supply and wait for a moment
until the power supply unit has discharged.
NOTICE!
When cleaning the label printer, personal protective equipment such as safety goggles and gloves are recommended.
Maintenance task
General cleaning.
Cleaning print roller.
Cleaning transfer ribbon drawing roller.
Cleaning printhead.
Clean label photocell.
Replacing printhead.
NOTICE!
The handling instructions for the use of Isopropanol (IPA) must be observed. In the case of skin or eye contact,
immediately wash off the fluid thoroughly with running water. If the irritation persists, consult a doctor. Ensure good
ventilation.
General Cleaning
CAUTION!
Abrasive cleaning agents can damage the print module.
Do not use abrasives or solvents to clean the outer surface of the label printer.
Remove dust and paper fuzz in the printing area with a soft brush or vacuum cleaner.
Clean outer surfaces with an all-purpose cleaner.
Cleaning the print roller
A
B
C
136
Frequency
As necessary.
Each time the label roll is changed or when the printout and
label transport are adversely affected.
Each time the transfer ribbon is changed or when the printout
is adversely affected.
Each time the transfer ribbon is changed or when the printout
is adversely affected.
When the label roll is changed.
In case of errors in printout.
A soiled print roll can lead to reduced print quality and can affect transport of
material.
CAUTION!
Wrong cleaning auxiliaries can damage the print roller!
Do not use sharp or hard objects to clean the print roller.
Open cover of print module.
Open printhead (B) by turning the red pressure lever (C) anticlockwise.
Remove labels and transfer ribbon form the print mechanics.
Remove deposits with roller cleaner and a soft cloth.
Turn the roller (A) manually step by step to clean the complete roller
(only possible when printer is switched off, as otherwise the step motor
is full of power and the roller is kept in its position).
English
Werbung
Kapitel
