Connecting The Cv Rewinder For Backing Paper; Initiation Of Print Module - Carl Valentin SPX II Kurzanleitung Und Hinweise Zur Produktsicherheit

SPX II

Connecting the CV Rewinder for Backing Paper


Switch off the print module.

Install the CV rewinder for backing paper with an external mounting plate at the appropriate position at the packaging
machine.

Insert plugs of backing paper rewinder into the socket provided for it.

Tighten the lateral protective screws at the connection plug in order to prevent an inadvertent removing of connection plug
in running operation.
CAUTION!
The print module can be damaged by defective hardware.

Switch on the print module.
After switching on the module the main menu appears which shows the model type, current date and time
Initiation of the print module

Once all connections have been made, switch on the print module.
After switching on the print module the main menu appears which shows the printer type, current date and time.

Insert label material and transfer ribbon.

Start measuring in menu Label layout/Measure label.

Press key to finish measuring.
NOTICE!
To enable correct measuring, at least two completed labels have to be passed through (not for continuous labels).
During measuring the label and gap length small differences can occur. Therefore the values can be set manually in menu
Label layout/Label and gap.
116 English