Unpack the Print Module
Lift the print module out of the box.
Check the print module for transport damages.
Remove foam transportation safeguards near the printhead.
Check delivery for completeness.
Scope of Delivery
Print module.
Power cable.
Data cable for USB interface.
I/O accessories
(female connectors for I/O, I/O 24 cable).
1 transfer ribbon roll.
NOTICE!
Retain original packaging for subsequent transport.
Setting up the print module
CAUTION!
The label printer and the print media can be damaged by moisture and water.
Set up the print module only in a dry place protected from sprayed water.
Mount the print module on a vibration-free and air draught-free.
Open cover of print module.
Remove foam transportation safeguards near the printhead.
Connecting the Print Module
The print module is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
110 ... 230 V / 50 ... 60 Hz without any adjustments or modifications.
CAUTION!
The direct print module can be damaged by undefined switch-on currents.
Set de power switch to '0' before plugging in the direct print module.
Insert power cable into power connection socket.
Insert plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the print module are grounded.
Connect print module to computer or network with a suitable cable.
Empty core, mounted on transfer ribbon rewinder.
Cleaning foil for printhead.
Documentation.
CD with printer drivers.
Labelstar Office LITE.
English
SPX II
115