Using Multiple Readers With Same Cradle; Services Available At Our Web Site - Datalogic GRYPHON M-Serie Kurzanleitung

UK/US
USING MULTIPLE
CRADLE
If you want to use several readers associated with the same cradle, you must
first Bind the cradle with one of the readers (see previously described
configuration procedure).
Successive readers can be associated with the same cradle by following the
configuration procedure substituting the Bind command with Join.
5.
The green LED on the Gryphon™ M will blink: the reader is ready to be
positioned onto the cradle.
CAUTION

SERVICES AVAILABLE AT OUR WEB SITE

By completing
www.datalogic.com/hhd/gryphon_utilities.htm, you have free access to
download the following items:
•
WinSetPlus™
WinSetPlus™ is a Windows-based utility program which allows device
configuration using a PC. It provides RS232 interface configuration as
well as configuration barcode printing.
•
Loader:
The Loader utility program is necessary to load the application software
(upgrades) onto your reader.
•
Software Upgrades:
Future software upgrades allow your reader to be updated with the latest
improvements.
These items are also available from your local Datalogic distributor.
6
If the cradle is not Bound to a reader, its address assumes
a random value which can cause conflicts and malfunctions
to other cradles within its range.
the electronic
READERS
Join
form
DATALOGIC
WITH SAME
at our website,