Midi Control Operation; Windows 2000 - Ecler nuo 4 Bedienungsanleitung

7. MIDI CONTROL OPERATION

7.1. Drivers installation
To connect the NUO4 to a computer using USB-MIDI interface, you must previously install USB and MIDI drivers
(provided on the CD). The process varies according to the operating system in use. The only supported operating
systems are Windows® 2000 (SP4) and XP.
7.1.1. Windows® 2000
Warning: before connecting the NUO4 to its computer, please perform the following steps. Any other kind of
installation could cause the computer to unexpectedly reboot. This is due to certain peculiarities in Windows® 2000
concerning MIDI devices support through USB.
1. Before connecting the NUO4 to the computer for the first time, run 'install.exe' from the 'Driver' folder on the
CD.
2. When the installer screen comes up, check that the NUO4 is disconnected and press 'Yes' to continue.
3. The 'Digital Signature Not Found' error message may appear during USB driver installation. If it does, click
YES to proceed with installation.
4. Restart your computer when the wizard tells you to do so.
5. After restart, connect the USB cable between the NUO4 and the computer.
6. The operating system will automatically detect the device. There may be a long pause while the operating
system detects the device until the end of the process.
7. Again, if the 'Digital Signature Not Found' error message appears, click YES to proceed with installation
8. Once the process completed, the NUO4 is identified as 'Ecler USB Midi' by the operating system.
9. To safely disconnect NUO4 USB cable, follow the Windows® 2000 standard method to 'Unplug or eject
hardware'. If the USB cable is directly removed a warning appears to inform you that the device extraction
has not been safely done.
7.1.2. Windows® XP (home or professional)
1. Check that the NUO4 USB cable is disconnected and start your computer.
2. Run 'install.exe' program form the "Driver" folder on the CD.
3. Install program will request the user to connect the NUO4 USB cable to the computer and to wait until the
operating system completes the drivers automatic default installation. Do not click 'Accept' until
Windows® XP tells you that the new device is ready to use (If you do it before, the installer tells you that he
can't complete installation and you have to restart the computer before retrying. Carefully follow all the
steps indicated in this manual). Caution: There may be a long pause while the operating system
detects the device until the end of the process.
4. Once Windows® XP tells you that the new device is ready to use, click 'Accept' to proceed with installation.
5. If XP Logo testing warning windows appears indicating that the driver you're going to install is not certified,
click 'Continue anyway' to proceed with installation.
6. Once the process completed, the NUO4 is identified as 'Ecler USB Midi' by the operating system and is
ready to use.
15