Cleaning The Air Flow Meter; Cleaning The Flue - Flue Connection; Maintenance - Cola WAVE CAN. ACC.e VETRO Installations-, Bedienungs- Und Wartungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Every 1800 hours of operation, by means of a message 'SERVICE DUE', the stove signals the need for

extraordinary maintenance (not under warranty) to be performed by qualified personnel who will carry out complete

cleaning and reset the message.

Any knocking or forcing can damage the fume extractor, making it noisy during operation; therefore

it is advisable to have this operation carried out by qualified personnel.

5.5 Cleaning the air flow meter

The air flow meter (it measures the flow of combustion air) installed inside the inlet pipe requires periodical internal

cleaning every 3-4 months, using suitable equipment (blowing compressed air or suitable brushes).

5.6 Cleaning the ceramic surfaces (ceramic models)

The ceramic tiles are handicraft products and therefore may have minor surface imperfections such as tiny spots or

slight colour differences. It is advisable to use a soft dry cloth to clean the ceramic surfaces; the use of detergents

could highlight any flaws.

The flue connection must be cleaned at least once a year or whenever necessary depending on stove use and the

type of installation.

Cleaning requires the suction and removal of the residuals in all the vertical and horizontal sections as well as the

bends from the stove to the flue.

It is advisable to also clean the flue every year, to ensure correct and safe evacuation of fumes.

For any maintenance or end of season cleaning, COLA recommends contacting an authorised

service centre, which will also check the wear on the stove's internal components.

6.1 Introduction

Operations on the internal parts of the stove must be carried out by qualified personnel. Contact the nearest

authorised service centre.

Make sure the stove is unplugged and cold before carrying out any work on it.

WAVE CANALIZZABILE

Inhaltsverzeichnis