Electrical Connection; Wiring Diagram - Cola WAVE CAN. ACC.e VETRO Installations-, Bedienungs- Und Wartungsanleitung

2.7 Electrical connection

Connect one end of the power cable to the rear socket of the stove, and the other to the wall socket.
The voltage supplied by the system must match that specified on the stove dataplate and in the technical data
section of this manual.
During stove idle periods it is advisable to remove the power cable.
- Make sure the electrical system is equipped with an earth and differential switch in accordance
with the
current Regulations.
- The power cable must never touch the stove exhaust pipe.

2.8 Wiring diagram

2.9 Emergency
Suitable fire-prevention devices should be arranged for any eventuality.
In case of a fire, proceed as follows:
- Immediately disconnect the plug.
- Extinguish the fire using suitable fire-extinguishers.
- Call the fire department immediately.
- Do not use jets of waters to extinguish the fire.
44 WAVE CANALIZZABILE