Cola WAVE CAN. ACC.e VETRO Installations-, Bedienungs- Und Wartungsanleitung Seite 50

4.7 Hot air outlet flow adjustment
The WAVE stove has a centrifugal fan for heat exchange with the combustion chamber, allowing the flow of hot air
to be conveyed frontally to the stove and/or at the top in ducting as described in par. 1.4; the hot air flow direction is
controlled manually by an internal valve with a lever and rod with knob.
The hot air flow depends on the choice of outlets and stove output; level 5 gives the maximum fan speed with
maximum flow of hot air.
The stove can convey the hot air flows entirely or partially to the front upper grille or the top grille and in the
connection of the ducting system by means of a valve controlled manually with a lever and rod; the rod, provided
with a knob, has 3 reference notches for selecting the hot air flow direction as shown in the figure.
Control rod in top position 1st reference
HOT AIR FLOW in
Hot air flow direction control VALVE
Control rod in middle position - 2nd ref.
HOT AIR FLOW in
in upper direction
frontal direction
frontal direction,
and in ducting
Control rod in position
3th reference HOT AIR FLOW in
upper direction and in
Detail view of upper output HOT AIR FLOW
in ducting
50
ducting
WAVE CANALIZZABILE