Silvercrest SAR 28 A1 Bedienungsanleitung Seite 29

Fault rectifi cation
Defect
The device on
the USB port is
not working
The card reader
cannot read the
card
NOTE
► Please contact Customer Service (see warranty card) if you are unable to
resolve the problem with any of the above actions.
SAR 28 A1
Possible cause
The USB port is intended for
devices working in accord-
ance with the USB standard.
Not all devices available on
the marketplace conform to
this standard. It is a possibil-
ity that a device not working
in accordance with the USB
standard is connected.
The card may be defective,
dirty or not properly inserted.
Rectifi cation
Connect a device that works in accord-
ance with the USB standard. Check that
the data carrier is formatted with the
FAT32 fi le system.
Check the card. Slide it in with the let-
tered side pointing to the right. Check
that the data carrier is formatted with
the FAT32 fi le system.
GB
25