Specifications - Makita 6319D Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Button
1-2. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Speed change lever
5-1. Action mode change lever
6-1. Arrow
6-2. Adjusting ring

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model 6319D
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
Vibration
The vibration total
determined according to EN60745:
Work mode: Drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
6-3. Graduations
7-1. Steel band
7-2. Grip base
7-3. Side grip
7-4. Protrusion
7-5. Groove
8-1. Sleeve
9-1. Bit
Model
Steel
Wood
Wood screw
Machine screw
High (3)
)
Medium (2)
Low (1)
Overall length
Net weight
Rated voltage
) : 71 dB(A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
6319D
45 mm
6 mm x 75 mm
0 -1,600
0 - 550
0 - 300
2.3 kg
D.C. 12 V
ENE034-1
For Model 6339D
Noise
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
ENG104-1
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode: Drilling into metal
ENG202-3
Vibration emission (a
Uncertainty (K) : 1.5 m/s
sum)
For Model 6349D
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
3
9-2. Bit holder
10-1. Depth rod
10-2. Clamp screw
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
6339D
13 mm
50 mm
6 mm x 75 mm 10 mm x 89 mm
6 mm
0 - 1,700
0 - 600
0 - 300
246 mm
2.4 kg
D.C. 14.4 V
) : 70 dB(A) or less
pA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s
h,D
2
) : 73 dB(A)
pA
6349D
65 mm
2.6 kg
D.C. 18 V
ENG103-2
ENG202-3
vector sum)
or less
ENG104-1