Activating/Deactivating Safeguard Function In Case Of Wrong Input - Conrad 75 19 05 Bedienungsanleitung

Proceed as follows:
Input example:
MMMM MMMM *20 TT #
7.5 Activating/Deactivating Safeguard Function in Case of
Wrong Input
If safeguard function for wrong input is active, the system is locked for
20 seconds after 5 wrong code inputs or 20 wrong subsequent characters. This
applies for master and user codes.
Safeguard in case of wrong input is deactivated in the factory settings.
Input example:
MMMM MMMM *51 #
You may also specify after which errors the safeguard is to be activated.
Input example:
MMMM MMMM *53 0 #
MMMM MMMM *53 1 #
If safeguard was activated, the factory setting is using 20 wrong subsequent
characters.
Explanation
TT = 01-99 seconds
TT = 00 Activation until user code input
Explanation
Activating/Deactivating the safeguard function in
case of wrong input
Explanation
Code lock is locked for 30 seconds after 20
wrong subsequent characters.
Code lock is locked for 30 seconds after 5 wrong
code inputs (master or user code).
27