Programming Or Changing The User Code; Deleting The User Code; Determine "Lock Out" Relay Closing Duration - Conrad 75 19 05 Bedienungsanleitung

7.3 Programming or Changing the User Code

There are two ways of entering or changing a user code:
Option 1:
Input example:
MMMM MMMM *XX code #
Second option:
Input example:
MMMM MMMM *6YY code #
Important!
When choosing your master and user code, please ensure that they have the
same number of character.
When you have programmed a master code with 6 characters in chapter 7.2, you
also have to program all user codes with 6 characters exactly.

7.3.1 Deleting the User Code

To delete one or all user codes, proceed as follows:
Input example:
MMMM MMMM *50 XX #

7.4 Determine "Lock Out" Relay Closing Duration

You can define the closing duration of the "Lock Out" (10) relay contacts.
The default setting is 5 seconds.
26
Explanation
XX = storage position number 01 - 19
code = new user code (4-8 characters)
Explanation
XX = storage position number 20 - 99
code = new user code (4-8 characters)
Explanation
XX = storage position number 01 - 99
XX = To delete all user codes, enter "00" instead
of the storage position number.