Operation; Programming Mode; Setting The Master Code - Conrad 75 19 05 Bedienungsanleitung

7. Operation

7.1 Programming Mode

The master code factory setting is 1234.
To enter the programming mode, enter the Master Code twice in succession.
Example: 1234 1234
As soon as the correct code is entered, the colour of the "red/yellow" LED (3) changes from red to
amber. You are now in programming mode and can make the settings described in the following.
Observe that too short a pressure on the respective button on the touch screen
will cause the input not to be registered.
The programming mode can be exited using the "#" button.
Important!
When choosing your master and user code, please ensure that they have the
same number of character.
When you, e.g. program a master code with 6 characters, also the user codes
have to have 6 characters exactly (see chapter 7.3).

7.2 Setting the Master Code

To determine a new master code, enter the following combination:
Input example:
MMMM MMMM *00 code #
Explanation
MMMM = current master code
code = new master code (4-8 characters)
25