Output Filter
Time interval
Time averaging filter
To smoothen the current output, a low-pass filter with adjustable time interval
can be switched on. When there is a jump at the input (100 %), the output level
is at 63 % after the time interval has been reached.
The time interval can be set from 0 to 120 sec. If the time interval is set to 0 sec,
the current output follows the input.
Please note:
The filter only acts on the current output and the current value of the second-
ary display, not on the measurement display, the limit values, or the controller!
Process variable
0 (4) - 20 mA
Time interval 0 ... 120 sec
34
OUT 3400(X)-071