After Using The Steam Brush; Cleaning And Care; Descaling; Storage - Silvercrest SDRB 1000 B1 Bedienungsanleitung

♦ If your clothes are heavily creased, use the
steam function by pressing the steam burst but-
ton 8 . To produce steam, set the temperature
control 3 to ••• or higher .
♦ If the heat-up indicator lamp 5 lights up during
operation, do not press the steam blast button
8 again: wait a few seconds until the heat-up
indicator lamp 5 goes out .
♦ Only repeat pressing the steam burst button 8
until the heat-up indicator lamp 5 lights up or
water drips from the ironing sole 0 . Wait until
the heat-up indicator lamp 5 goes out before
initiating another burst of steam .
NOTE
► If you press the steam burst button 8 while
the heat-up indicator lamp 5 is illuminated,
the appliance will produce condensation
instead of steam, and water will drip from the
ironing sole 0 .
♦ If the water tank runs dry during operation 1,
pull the mains plug 7 before refilling it .
♦ To set the appliance down briefly during opera-
tion, unfold the stand 9 to the front and lean
the appliance on it . To resume use of the appli-
ance, simply fold the stand 9 back to the rear .

After using the steam brush

♦ Set the temperature control 3 to "MIN" .
♦ Always disconnect the plug 7 from the mains
power socket after use .
♦ Empty the water tank 1 by opening the filler
opening 2 of the water tank 1, turning the ap-
pliance upside down and swinging it gently .
SDRB 1000 B1

Cleaning and care

WARNING – RISK OF INJURY!
► Always disconnect the mains plug 7 before
cleaning the appliance . There is a risk of
electric shock! Allow the appliance to cool
down . Risk of burns!
CAUTION
► Do not use aggressive cleaning agents . These
may damage the surfaces .
♦ Clean the housing with a soft, dry cloth only .
♦ Clean the metal parts of the appliance with a
damp cloth and a mild, non-scouring detergent .
♦ To clean the ironing sole 0, wipe it with a
damp cloth and a small amount of dish soap .

Descaling

If the appliance produces less steam over time,
descale the steam brush .
♦ You can do this with a regular descaling agent
containing citric acid . Adhere to the instructions
of the descaling agent .

Storage

CAUTION
► Unplug the mains plug 7 and allow the ap-
pliance to cool down before putting it away .
Risk of fire!
► Store the appliance in a dry place . You can
hang the appliance up by the hanger 6 .
GB │ IE 21 ■
│