Returning To The Factory Setup; Problem Chart; Cleaning And Maintenance; Technical Specifications - EuroLite KRX-16 Bedienungsanleitung

Release the Step-button and Blackout-button and the program mode is locked.

6.16 Returning to the factory setup

Press and hold the Pattern-buttons 3, 6, 10 and 15 and switch the unit off. Wait for aprox. 30 seconds and
switch the unit on again.

7. PROBLEM CHART

PROBLEM
No power.
No signal output.

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.

9. TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Number of control-channels:
Integrated programs:
Sound-control:
Audio-input:
Audio-sensitivity:
DMX 512-output:
Dimensions (LxWxH):
Minimum mounting depth:
Weight:
Optional foot-switch:
EUROLITE Foot-switch with stereo jack
Please note: Every information is subject to change without prior notice. 29.07.2003 ©
CAUSE
The power unit is not connected.
Blackout-mode activated.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
via 12-20 V DC, 500 mA power unit included in the delivery
10 W
16
16
via built-in microphone or via audio-input
RCA
0.1 - 1 V
3-pin XLR-connector with polarity selector
483 x 222 x 85 mm
19" mounting dimensions with 5 u
100 mm
4.4 kg
No. 70064490
Check the connection cable of the
power unit and any extension-cables.
Switch off blackout by pressing the
Blackout-button.
21/35
REMEDY
70064620X74NXS_V_1_0.DOC