Operating Determinations; Description; Features - EuroLite KRX-16 Bedienungsanleitung

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class III. The device always has to be operated with an appropriate
transformer.
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
Keep away children and amateurs from the device!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

3. OPERATING DETERMINATIONS

This device is a DMX-controller for controlling DMX-effects or spots in discotheques, on stages etc. This
product is allowed to be operated with a direct voltage of DC 12-20 V, 500 mA and was designed for indoor
use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.

4. DESCRIPTION

4.1 Features

DMX lighting controller 16 channels
16 channel-faders with LED • Fade Time fader with LED for adjusting the step time • Master-fader with LED
for adjusting the total output level • Audio-fader with LED for adjusting the music sensitivity • Speed-fader for
adjusting the program-speed • Flash-button per channel and master-flash (Full On-button) • LED-display of
all modes • 16 built-in programs • Dimmer: Manual control of the channels via sliders • Full On: all channels
can be switched on together • Program speed adjustable via speed-fader or Tap Sync-button • Sound-control
via external signal or integrated microphone • Sound to light via RCA-socket • Foot switch connection via
1/4" stereo-jack plug • Power supply via included power unit • 19"-dimensions
16/35 70064620X74NXS_V_1_0.DOC