Troubleshooting - AKG EMOTION series Bedienungshinweise

When installing or removing the PB 1000,
make sure to grip the capsule and shock
mount firmly with your thumb and forefin-
gein order to prevent the capsule being
severed from the shock mount.
To clean the surface of the microphone body, use
a soft cloth moistened with water.
1. Unscrew the front grill from the microphone
CCW.
2. Remove the windscreen from the from grill and
wash the windscreen in soap suds.
3. Allow the windscreen to dry overnight.
4. Replace the windscreen in the front grill and
screw the front grill on the microphone CW.
Problem
No sound:
3 Using Your Microphone

5 Troubleshooting

Possible Cause
1. Power to mixer
and/or amplifier is
off.
2. Channel or master
fader on mixer, or
volume control on
amplifier is at zero.
Important!
4 Cleaning
4.1 Microphone
Body
4.2 Internal
Windscreen
Remedy
1. Switch power to
mixer or amplifier
on.
2. Set channel or
master fader on
mixer or volume
control on ampli-
fier to desired
level.
19