Troubleshooting - AKG MicroMic C516 ML Bedienungsanleitung

24
Downloaded from www.Manualslib.com

5 Troubleshooting

Problem
No sound: 1. Power to mixer
2. Channel or master
3. Microphone is not
4. Cable connectors are
5. Cable is defective.
6. No supply voltage.
Distortion: 1. Gain control on the
2. Mixer input sensitivity
Also read the transmitter and receiver manuals!
manuals search engine
Possible Cause
and/or amplifier is off.
fader on mixer, or vol-
ume control on am-
plifier is at zero.
connected to mixer
or amplifier.
seated loosely.
mixer set too high.
too high.
Remedy
1. Switch power to
mixer or amplifier on.
2. Set channel or mas-
ter fader on mixer or
volume control on
amplifier to desired
level.
3. Connect microphone
to mixer or amplifier.
4. Check cable connec-
tors for secure seat.
5. Check cable and re-
place if damaged.
6. Switch phantom
power on.
Phantom power sup-
ply: connect to power
outlet or insert bat-
tery
(batteries).
Check cable and re-
place if necessary.
1. Turn gain control
down CCW.
2. Connect a 10-dB
preattenuation pad
between microphone
cable and input.
AKG C 516 ML