Target Group; Basic Safety Information - Siko IG06 Originalmontageanleitung

IG06, IG07
22 Safety information
NOTICE
WARNING
DANGER
DANGER
Important operating information that may facilitate operation or many
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions is intended for the configuration, commissioning
and mounting personnel of plant or machine manufacturers who possess
special expertise in drive technology. This group of operators needs pro-
found knowledge of an incremental encoder necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or incremental encoder.
` Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
` This personnel must be able to recognize dangers that might arise
from mechanical, electrical or electronic equipment.
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
• are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.

2.4 Basic safety information

Danger of explosion
` Do not use the incremental encoder in explosive zones.
Danger to man or machine
Danger to man or machine or damage to plant equipment caused by failure
or malfunctioning of the incremental encoder.
` Provide suitable safety installations including protective equipment or
limit switches.
` Put the machine out of operation and protect it against unintended
starting.
IG06, IG07 · Date 08.03.2019 · Art. No. 79650 · Mod. status 33/19
English