Cocraft LXC MTG18 Original Bedienungsanleitung Seite 8

3. Press in the catches on
the sides of the grass shear/
hedge trimmer head to release
the head.
Overload protection and other safety features
The battery has a number of safety features that prevent damage to the shrub/grass
shears and battery during use.
• During brief moments of high loads, the overload protection may switch the shrub/
grass shears off. This protection resets automatically. Release the power switch,
wait a few seconds, ensure that there is no load and restart the shrub/grass shears.
The shrub/grass shears should now function normally again.
• Under high loads for extended periods, the overheating protection may switch the shrub/
grass shears off. This feature is self-resetting but the shrub/grass shears cannot be
restarted until it has returned to a safe operating temperature. Let the shrub/grass
shears battery cool before trying to restart it. Adverse temperatures can occur in
direct sunlight and should therefore be avoided.
• The battery has a low-voltage protection device, which operates when the battery
becomes discharged. The low-voltage protection device turns off the shrub/grass
shears automatically and the battery then needs to be recharged.
Instructions for use
Warning:
• Always keep the work area tidy so you can move freely without the risk of tripping
over obstacles.
• Make sure that there are no foreign objects or loose branches which could
become caught in the blades of the grass shears/hedge trimmer.
• Make sure that you are wearing all required safety gear before starting.
• Make sure that all parts of the grass shears/hedge trimmer are intact, accounted
for and undamaged.
• Make sure that the blades are sharp and lubricated.
• Keep the motor housing ventilation slots (1) free from debris.
• The safety lock button (2) and power trigger (3) are easily depressed and do not
stick or function abnormally in any way.
• Ensure that the handle is clean and easily gripped.
8