Cocraft LXC MTG18 Original Bedienungsanleitung Seite 5

5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Repairs and service should only be performed by qualified persons, and only
with original spare parts. This guarantees the safety of the power tool.
Specific safety instructions for electric grass shears
• This product must not be used by anyone (including children) suffering from
physical or mental impairment. Persons without sufficient experience and
knowledge may only use the product if they have received instructions in its use by
someone responsible for their safety.
• Keep all bodily parts away from the cutting blades. Do not remove debris from
the blades or hold onto any material that you are cutting whilst the cutter blades
are in motion. Remove the battery before dislodging any debris. One moment of
carelessness can result in personal injury.
• Never let children play with the product.
• Switch the product off and carry it by the handle when moving it over short
distances. Always switch the product off and fit the blade guard before
transporting the product or moving it from one workplace to another.
• Before use, check the grass to be cut for foreign objects.
• After the product has been switched off, the cutter blades will continue moving for
a few seconds.
Keep hands away from moving blades.
5